Pfeiffer HiPace 300 Turbo Pump
Starting at: $16,239.24 Starting at: $14,290.53
Pfeiffer HiPace 300 Turbo Pump
- Rugged, powerful turbopump with a pumping speed of up to 260 l/s for N2
- Integrated TC 400 drive electronics
- Ideal for analytical and industrial applications
- For installation in any orientation
- With integrated water cooling for maximum gas throughput
- Flexible through the ability to employ up to 4 accessories
- Ideal for fast cycles
- Extensive accessories expand the range of applications
Available with DN100 ISO-K or CF-F Flanges
Please call for lead time.
- Description
- Technical Specs
- Additional information
- Downloads
- Brand
- Dimensions
- Pump Curve
- Videos
Description
HiPace stands for a full range of compact and powerful turbopumps in the pumping speeds range of 10 to 2,050 l/s. It provides high cost-efficiency and flexibility, which allows almost all pumps of this range to be installed in any orientation. The proven bearing system guarantees unrivaled reliability. High pumping speeds, high backing pump compatibility and high gas throughput as well as excellent compression for light gases are made possible by the innovative rotor design.
What is hybrid bearing?
The combination of a ceramic ball bearing on the fore-vacuum side and a permanent magnetic radial bearing on the high vacuum side is called hybrid bearing.
This bearing technology does not require electromagnets and has a long service life with maintenance intervals of approximately 4 years. The ball bearing and the operating fluid reservoir can be replaced on site within less than 30 minutes.
- Rugged, powerful turbopump with a pumping speed of up to 260 l/s for N2
- Integrated TC 400 drive electronics
- Ideal for analytical and industrial applications
- For installation in any orientation
- With integrated water cooling for maximum gas throughput
- Flexible through the ability to employ up to 4 accessories
- Ideal for fast cycles
- Extensive accessories expand the range of applications
Please call for lead time.
| Bearing | Hybrid |
| Compression ratio for Ar | > 1 · 1011 |
| Compression ratio for H2 | 9 · 105 |
| Compression ratio for He | > 1 · 108 |
| Compression ratio for N2 | > 1 · 1011 |
| Cooling method, optional | Air |
| Cooling method, standard | Water |
| Cooling water consumption | 50 l/h |
| Cooling water consumption, max | 50 l/h |
| Cooling water consumption, min | 50 l/h |
| Cooling water temperature | 15 °C | 59 °F | 288 K |
| Electronic drive unit | with TC 400 |
| Flange (in) | DN 100 ISO-K |
| Flange (out) | DN 16 ISO-KF/G ¼” |
| Fore-vacuum max. for N2 | 20 hPa | 15 Torr | 20 mbar |
| Gas throughput at full rotational speed for Ar | 7 hPa·l/s |
| Gas throughput at full rotational speed for H2 | > 14 hPa·l/s |
| Gas throughput at full rotational speed for He | 20 hPa·l/s |
| Gas throughput at full rotational speed for N2 | 14 hPa·l/s |
| Interface, extended | Profibus, DeviceNet, E74 |
| Interfaces | RS-485, Remote |
| Mounting orientation | in any orientation |
| Operating voltage: V DC | 24 (± 5 %) V DC V DC |
| Permissible magnetic field max. | 5.5 mT |
| Protection category | IP54 |
| Pumping speed for Ar | 255 l/s |
| Pumping speed for H2 | 220 l/s |
| Pumping speed for He | 255 l/s |
| Pumping speed for N2 | 260 l/s |
| Rotation speed ± 2 % | 60,000 rpm | 60,000 min-1 |
| Rotation speed variable | 35 – 100 % |
| Run-up time | 1.8 min |
| Sound pressure level | ≤ 50 dB(A) |
| Ultimate pressure according to PNEUROP | < 1 · 10-7 hPa | < 7.5 · 10-8Torr | < 1 · 10-7 mbar |
| Venting connection | G 1/8″ |
| Weight | 6.7 kg | 14.77 lb |
Additional information
| Weight | N/A |
|---|---|
| Pfeiffer HiPace 300 |
Brand
Pfeiffer
